#!/bin/sh
# $Id: wxWidgets.SlackBuild,v 1.3 2025/01/05 13:08:36 root Exp root $
# Copyright 2019, 2020, 2022, 2025  Eric Hameleers, Eindhoven, NL
# All rights reserved.
#
#   Permission to use, copy, modify, and distribute this software for
#   any purpose with or without fee is hereby granted, provided that
#   the above copyright notice and this permission notice appear in all
#   copies.
#
#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#   SUCH DAMAGE.
# -----------------------------------------------------------------------------
#
# Slackware SlackBuild script 
# ===========================
# By:          Eric Hameleers <alien@slackware.com>
# For:         wxWidgets
# Descr:       cross-platform API for writing GTK3 and Qt5 GUI applications
# URL:         http://www.wxwidgets.org/
# Build needs: 
# Needs:       
# Changelog:   
# 3.0.4-1:     28/Feb/2019 by Eric Hameleers <alien@slackware.com>
#              * Initial build.
# 3.0.5.1-1:   28/may/2020 by Eric Hameleers <alien@slackware.com>
#              * Update, adding gtk2 components.
# 3.0.5.1-2:   29/oct/2020 by Eric Hameleers <alien@slackware.com>
#              * Rebuilt for slackware-current.
# 3.2.1-1:     18/sep/2022 by Eric Hameleers <alien@slackware.com>
#              * Update.
# 3.2.6-1:     03/jan/2025 by Eric Hameleers <alien@slackware.com>
#              * Update. Package has been renamed to 'wxWidgets' after
#                dropping the GTK+2 support and adding Qt5 support.
# 
# Run 'sh wxWidgets.SlackBuild' to build a Slackware package.
# The package (.t?z) and .txt file as well as build logs are created in /tmp .
# Install the package using 'installpkg' or 'upgradepkg --install-new'.
#
# -----------------------------------------------------------------------------

PRGNAM=wxWidgets
SRCNAM=wxWidgets
VERSION=${VERSION:-3.2.6}
BUILD=${BUILD:-1}
NUMJOBS=${NUMJOBS:-" -j$(nproc) "}
TAG=${TAG:-alien}

DOCS="docs/*"

# Where do we look for sources?
SRCDIR=$(cd $(dirname $0); pwd)

# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
TMP=${TMP:-/tmp/build}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}

SOURCE="$SRCDIR/${SRCNAM}-${VERSION}.tar.bz2"
SRCURL="https://github.com/${SRCNAM}/${SRCNAM}/releases/download/v${VERSION}/${SRCNAM}-${VERSION}.tar.bz2"

##
## --- with a little luck, you won't have to edit below this point --- ##
##

# Automatically determine the architecture we're building on:
if [ -z "$ARCH" ]; then
  case "$(uname -m)" in
    i?86) ARCH=i586 ;;
    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
    # Unless $ARCH is already set, use uname -m for all other archs:
    *) ARCH=$(uname -m) ;;
  esac
  export ARCH
fi
# Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
case "$ARCH" in
  i?86)      SLKCFLAGS="-O2 -march=${ARCH} -mtune=i686"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  x86_64)    SLKCFLAGS="-O2 -fPIC"
             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
             ;;
  armv7hl)   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  *)         SLKCFLAGS=${SLKCFLAGS:-"-O2"}
             SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""}
             ;;
esac

case "$ARCH" in
    arm*)    TARGET=$ARCH-slackware-linux-gnueabi ;;
    *)       TARGET=$ARCH-slackware-linux ;;
esac

# Exit the script on errors:
set -e
trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
# Catch unitialized variables:
set -u
P1=${1:-1}

# Save old umask and set to 0022:
_UMASK_=$(umask)
umask 0022

# Create working directories:
mkdir -p $OUTPUT          # place for the package to be saved
mkdir -p $TMP/tmp-$PRGNAM # location to build the source
mkdir -p $PKG             # place for the package to be built
rm -rf $PKG/*             # always erase old package's contents
rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build
rm -rf $OUTPUT/{checkout,configure,make,install,error,makepkg,patch}-$PRGNAM.log
                          # remove old log files

# Source file availability:
if ! [ -f ${SOURCE} ]; then
  echo "Source '$(basename ${SOURCE})' not available yet..."
  # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
  [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)"
  if [ -f ${SOURCE} ]; then echo "Ah, found it!"; continue; fi
  if ! [ "x${SRCURL}" == "x" ]; then
    echo "Will download file to $(dirname $SOURCE)"
    wget --no-check-certificate -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true
    if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then
      echo "Downloading '$(basename ${SOURCE})' failed... aborting the build."
      mv -f "${SOURCE}" "${SOURCE}".FAIL
      exit 1
    fi
  else
    echo "File '$(basename ${SOURCE})' not available... aborting the build."
    exit 1
  fi
fi

if [ "$P1" == "--download" ]; then
  echo "Download complete."
  exit 0
fi

# --- PACKAGE BUILDING ---

echo "++"
echo "|| $PRGNAM-$VERSION"
echo "++"

cd $TMP/tmp-$PRGNAM
echo "Extracting the source archive(s) for $PRGNAM..."
tar -xf ${SOURCE}
cd ${SRCNAM}-${VERSION}
chown -R root:root .
chmod -R u+w,go+r-w,a+rX-st .
# Build separately for gtk3 and qt5:
mkdir -p build-${PRGNAM}-gtk3 build-${PRGNAM}-qt5

echo Building ...
export LDFLAGS="$SLKLDFLAGS"
export CXXFLAGS="$SLKCFLAGS"
export CFLAGS="$SLKCFLAGS"

# Note: enabling 'stl' will break compilation of audacity.

# The cmake configuration does not understand 64bit Slackware:
sed -i build/cmake/config.cmake \
  -e "s,prefix}/lib,prefix}/lib${LIBDIRSUFFIX}," \
  -e "s,/lib/,/lib${LIBDIRSUFFIX}/,"
sed -i build/cmake/functions.cmake \
  -e 's,lib${GEN_EXPR_DIR,lib'${LIBDIRSUFFIX}'${GEN_EXPR_DIR,'
sed -i build/cmake/install.cmake \
  -e "s,"lib/,"lib${LIBDIRSUFFIX}/," -e "s,/lib/,/lib${LIBDIRSUFFIX}/,"

function my_cmake_wx() {
  cmake $* \
    -DCMAKE_BUILD_TYPE=Release \
    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
    -DCMAKE_INSTALL_PREFIX=/usr \
    -DCMAKE_INSTALL_LIBDIR=/usr/lib${LIBDIRSUFFIX} \
    -DCMAKE_INSTALL_SYSCONFDIR=/etc \
    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
    -DwxBUILD_MONOLITHIC=OFF \
    -DwxBUILD_SAMPLES=OFF \
    -DwxBUILD_SHARED=ON \
    -DwxBUILD_TESTS=OFF \
    -DwxUSE_EXPAT=sys \
    -DwxUSE_GTKPRINT=ON \
    -DwxUSE_LIBJPEG=sys \
    -DwxUSE_LIBLZMA=sys \
    -DwxUSE_LIBPNG=sys \
    -DwxUSE_LIBTIFF=sys \
    -DwxUSE_LIBMSPACK=OFF \
    -DwxUSE_LIBSDL=ON \
    -DwxUSE_NANOSVG=builtin \
    -DwxUSE_OPENGL=ON \
    -DwxUSE_PRIVATE_FONTS=ON \
    -DwxUSE_REGEX=sys\
    -DwxUSE_STL=OFF \
    -DwxUSE_ZLIB=sys \
    ..
}

echo "-- gtk3 first"
pushd build-${PRGNAM}-gtk3
  my_cmake_wx -DwxBUILD_TOOLKIT=gtk3 \
    2>&1 | tee $OUTPUT/configure-${PRGNAM}_gtk3.log
  make $NUMJOBS 2>&1 | tee $OUTPUT/make-${PRGNAM}_gtk3.log
  make DESTDIR=$PKG install 2>&1 | tee $OUTPUT/install-${PRGNAM}_gtk3.log
  # Let the two toolkits co-exist with eachother:
  mv $PKG/usr/bin/wx-config{,-gtk3}
popd

echo "-- qt5 next"
pushd build-${PRGNAM}-qt5
  my_cmake_wx -DwxBUILD_TOOLKIT=qt \
    2>&1 | tee $OUTPUT/configure-${PRGNAM}_qt5.log
  make $NUMJOBS 2>&1 | tee $OUTPUT/make-${PRGNAM}_qt5.log
  make DESTDIR=$PKG install 2>&1 | tee $OUTPUT/install-${PRGNAM}_qt5.log
  # Let the two toolkits co-exist with eachother:
  mv $PKG/usr/bin/wx-config{,-qt5}
popd

# Fix remaining lib64 inconsistencies;
sed -i $PKG/usr/lib${LIBDIRSUFFIX}/cmake/$PRGNAM/${PRGNAM}Targets.cmake \
  -e 's,/lib/,/lib'${LIBDIRSUFFIX}'/,g' \

# Make the gtk+3 toolkit the default:
ln -s wx-config-gtk3 $PKG/usr/bin/wx-config

# Install an aclocal file:
install -D -m0644 wxwin.m4 -t $PKG/usr/share/aclocal

# Add documentation:
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
find $PKG/usr/doc -type f -exec chmod 644 {} \;

# Strip binaries (if any):
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true

# Add a package description:
mkdir -p $PKG/install
cat $SRCDIR/slack-desc > $PKG/install/slack-desc

# Build the package:
cd $PKG
makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
cd $OUTPUT
md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz}.md5
cd -
cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt

# Restore the original umask:
umask ${_UMASK_}