#!/bin/sh
# $Id: gnome-mplayer.SlackBuild,v 1.19 2014/12/12 15:13:55 root Exp root $
# Copyright 2009, 2010, 2011, 2012, 2013, 2014  Eric Hameleers, Eindhoven, NL
# All rights reserved.
#
#   Permission to use, copy, modify, and distribute this software for
#   any purpose with or without fee is hereby granted, provided that
#   the above copyright notice and this permission notice appear in all
#   copies.
#
#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#   SUCH DAMAGE.
# -----------------------------------------------------------------------------
#
# Slackware SlackBuild script 
# ===========================
# By:         Eric Hameleers <alien@slackware.com>
# For:        gnome-mplayer
# Descr:      GTK2 interface to MPlayer
# URL:        http://kdekorte.googlepages.com/gnomemplayer/
# Needs:      gmtk
# Changelog:  
# 0.9.8-1:    20/Oct/2009 by Eric Hameleers <alien@slackware.com>
#             * Initial build.
# 0.9.9-1:    11/feb/2010 by Eric Hameleers <alien@slackware.com>
#             * Update.
# 0.9.9.2-1:  02/jun/2010 by Eric Hameleers <alien@slackware.com>
#             * Update.
# 1.0.3-1:    26/jun/2011 by Eric Hameleers <alien@slackware.com>
#             * Update.
# 1.0.4-1:    03/jul/2011 by Eric Hameleers <alien@slackware.com>
#             * Update. Removed "--without-gconf" from configure, so that
#               an existing GConf installation will be used.
# 1.0.6-1:    11/oct/2012 by Eric Hameleers <alien@slackware.com>
#             * Update for Slackware 14.
# 1.0.7-1:    19/feb/2013 by Eric Hameleers <alien@slackware.com>
#             * Update.
# 1.0.8-1:    19/nov/2013 by Eric Hameleers <alien@slackware.com>
#             * Update.
# 1.0.9-1:    12/dev/2014 by Eric Hameleers <alien@slackware.com>
#             * Update.
# 
# Run 'sh gnome-mplayer.SlackBuild' to build a Slackware package.
# The package (.tgz) and .txt file as well as build logs are created in /tmp .
# Install it using 'installpkg'. 
#
# -----------------------------------------------------------------------------

# Set initial variables:

PRGNAM=gnome-mplayer
VERSION=${VERSION:-1.0.9}
BUILD=${BUILD:-1}
NUMJOBS=${NUMJOBS:" -j4 "}
TAG=${TAG:-alien}

DOCS="AUTHORS COPYING ChangeLog NEWS README DOCS/keyboard_shortcuts.txt \
      DOCS/tech/dbus.txt DOCS/tech/plugin-interaction.txt"

# Where do we look for sources?
SRCDIR=$(cd $(dirname $0); pwd)

# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
TMP=${TMP:-/tmp/build}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}

SOURCE="$SRCDIR/${PRGNAM}-${VERSION}.tar.gz"
SRCURL="https://gnome-mplayer.googlecode.com/svn/packages/${PRGNAM}-${VERSION}.tar.gz"

##
## --- with a little luck, you won't have to edit below this point --- ##
##

# Automatically determine the architecture we're building on:
MARCH=$( uname -m )
if [ -z "$ARCH" ]; then
  case "$MARCH" in
    i?86)    export ARCH=i486 ;;
    armv7hl) export ARCH=$MARCH ;;
    armv6hl) export ARCH=$MARCH ;;
    arm*)    export ARCH=arm ;;
    # Unless $ARCH is already set, use uname -m for all other archs:
    *)       export ARCH=$MARCH ;;
  esac
fi

case "$ARCH" in
  i486)      SLKCFLAGS="-O2 -march=i486 -mtune=i686"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  x86_64)    SLKCFLAGS="-O2 -fPIC"
             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
             ;;
  armv7hl)   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  armv6hl)   SLKCFLAGS="-O2 -march=armv6 -mfpu=vfp -mfloat-abi=hard"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  *)         SLKCFLAGS="-O2"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
esac

case "ARCH" in
    arm*)    TARGET=$ARCH-slackware-linux-gnueabi ;;
    *)       TARGET=$ARCH-slackware-linux ;;
esac

# Exit the script on errors:
set -e
trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
# Catch unitialized variables:
set -u
P1=${1:-1}

# Save old umask and set to 0022:
_UMASK_=$(umask)
umask 0022

# Create working directories:
mkdir -p $OUTPUT          # place for the package to be saved
mkdir -p $TMP/tmp-$PRGNAM # location to build the source
mkdir -p $PKG             # place for the package to be built
rm -rf $PKG/*             # always erase old package's contents
rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build
rm -rf $OUTPUT/{configure,make,install,error,makepkg}-$PRGNAM.log
                          # remove old log files

# Source file availability:
if ! [ -f ${SOURCE} ]; then
  echo "Source '$(basename ${SOURCE})' not available yet..."
  # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
  [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)"
  if [ -f ${SOURCE} ]; then echo "Ah, found it!"; continue; fi
  if ! [ "x${SRCURL}" == "x" ]; then
    echo "Will download file to $(dirname $SOURCE)"
    wget -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true
    if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then
      echo "Downloading '$(basename ${SOURCE})' failed... aborting the build."
      mv -f "${SOURCE}" "${SOURCE}".FAIL
      exit 1
    fi
  else
    echo "File '$(basename ${SOURCE})' not available... aborting the build."
    exit 1
  fi
fi

if [ "$P1" == "--download" ]; then
  echo "Download complete."
  exit 0
fi

# --- PACKAGE BUILDING ---

echo "++"
echo "|| $PRGNAM-$VERSION"
echo "++"

cd $TMP/tmp-$PRGNAM
echo "Extracting the source archive(s) for $PRGNAM..."
tar -xvf ${SOURCE}
cd ${PRGNAM}-${VERSION}

chown -R root:root .
chmod -R u+w,go+r-w,a+X-s .

echo Building ...
LDFLAGS="$SLKLDFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
CFLAGS="$SLKCFLAGS" \
./configure \
  --prefix=/usr \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --mandir=/usr/man \
  --docdir=/usr/doc/$PRGNAM-$VERSION \
  --localstatedir=/var \
  --sysconfdir=/etc \
  --disable-gtk3 \
  --disable-nautilus \
  --disable-schemas-install \
  --with-alsa \
  --with-libnotify \
  --program-prefix= \
  --program-suffix= \
  --build=$TARGET \
  2>&1 | tee $OUTPUT/configure-${PRGNAM}.log
  # Adding '--disable-gtk3' causes error:
  # Gtk-ERROR **: GTK+ 2.x symbols detected. Using GTK+ 2.x and GTK+ 3 in the same process is not supported
  # ... unless gmtk also is built without gtk3 support.
  # Without gtk3 we also do not need the symbolic icon fallback patch anymore.

make $NUMJOBS 2>&1 | tee $OUTPUT/make-${PRGNAM}.log
make DESTDIR=$PKG install 2>&1 | tee $OUTPUT/install-${PRGNAM}.log

# Add this to the doinst.sh:
! [ -d $PKG/install ] && mkdir -p $PKG/install
cat <<EOT >> $PKG/install/doinst.sh
# Compile glib schema files:
if [ -x usr/bin/glib-compile-schemas ]; then
  chroot . /usr/bin/glib-compile-schemas usr/share/glib-2.0/schemas > /dev/null 2>&1
fi

# Update the desktop database:
if [ -x usr/bin/update-desktop-database ]; then
  chroot . /usr/bin/update-desktop-database usr/share/applications > /dev/null 2>&1
fi

# Update the mime database:
if [ -x usr/bin/update-mime-database ]; then
  chroot . /usr/bin/update-mime-database usr/share/mime >/dev/null 2>&1
fi

# Update hicolor theme cache:
if [ -d usr/share/icons/hicolor ]; then
  if [ -x /usr/bin/gtk-update-icon-cache ]; then
    chroot . /usr/bin/gtk-update-icon-cache -f -t usr/share/icons/hicolor 1> /dev/null 2> /dev/null
  fi
fi

EOT

# Add documentation:
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
find $PKG/usr/doc -type f -exec chmod 644 {} \;

# Compress the man page(s):
if [ -d $PKG/usr/man ]; then
  find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
  for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
fi

# Strip binaries (if any):
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true

# Add a package description:
mkdir -p $PKG/install
cat $SRCDIR/slack-desc > $PKG/install/slack-desc
if [ -f $SRCDIR/doinst.sh ]; then
  cat $SRCDIR/doinst.sh >> $PKG/install/doinst.sh
fi
if [ -f $SRCDIR/slack-required ]; then
  cat $SRCDIR/slack-required > $PKG/install/slack-required
fi

# Build the package:
cd $PKG
makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
cd $OUTPUT
md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz.md5
cd -
cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt
if [ -f $PKG/install/slack-required ]; then
  cat $PKG/install/slack-required > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.dep
fi

# Restore the original umask:
umask ${_UMASK_}