#!/bin/sh
# $Id: flatpak.SlackBuild,v 1.8 2026/01/02 16:45:41 root Exp root $
# Copyright 2022, 2023, 2026  Eric Hameleers, Eindhoven, NL
# All rights reserved.
#
#   Permission to use, copy, modify, and distribute this software for
#   any purpose with or without fee is hereby granted, provided that
#   the above copyright notice and this permission notice appear in all
#   copies.
#
#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#   SUCH DAMAGE.
# -----------------------------------------------------------------------------
#
# Slackware SlackBuild script 
# ===========================
# By:          Eric Hameleers <alien@slackware.com>
# For:         flatpak
# Descr:       linux application sandboxing and distribution framework
# URL:         https://flatpak.org/
# Build needs: 
# Needs:       appstream bubblewrap libostree xdg-dbus-proxy
#              xdg-desktop-portal-gtk
# Changelog:   
# 1.14.0-1:    15/oct/2022 by Eric Hameleers <alien@slackware.com>
#              * Initial build.
# 1.14.0-2:    23/nov/2022 by Eric Hameleers <alien@slackware.com>
#              * Add xdg-dbus-proxy as new dep
# 1.15.1-1:    23/nov/2022 by Eric Hameleers <alien@slackware.com>
#              * Update.
# 1.15.2-1:    18/feb/2023 by Eric Hameleers <alien@slackware.com>
#              * Update.
# 1.15.4-1:    10/aug/2023 by Eric Hameleers <alien@slackware.com>
#              * Update.
# 1.16.2-1:    02/jan/2026 by Eric Hameleers <alien@slackware.com>
#              * Update.
# 
# Run 'sh flatpak.SlackBuild' to build a Slackware package.
# The package (.t?z) and .txt file as well as build logs are created in /tmp .
# Install the package using 'installpkg' or 'upgradepkg --install-new'.
#
# -----------------------------------------------------------------------------

PRGNAM=flatpak
VERSION_CUR=1.16.2
VERSION_150=1.12.7
BUILD=${BUILD:-1}
NUMJOBS=${NUMJOBS:-" -j$(nproc) "}
TAG=${TAG:-alien}

DOCS="COPYING INSTALL NEWS README.md"

if [ -z "$VERSION" ]; then
  eval $(grep -E '(^VERSION_ID=|^VERSION_CODENAME=)' /etc/os-release)
  if [ "$VERSION_ID" == "15.0" ] && [ "$VERSION_CODENAME" == "stable" ]; then
    VERSION=$VERSION_150
    APPSTREAM=appstream-glib
  else
    VERSION=$VERSION_CUR
    APPSTREAM=appstream
  fi
fi

# Flatpak system helper (as defined in https://slackbuilds.org/uid_gid.txt):
FLAT_UID=372
FLAT_GID=372

# Where do we look for sources?
SRCDIR=$(cd $(dirname $0); pwd)

# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
TMP=${TMP:-/tmp/build}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}

SOURCE[0]="$SRCDIR/${PRGNAM}-${VERSION}.tar.xz"
SRCURL[0]="https://github.com/${PRGNAM}/${PRGNAM}/releases/download/${VERSION}/${PRGNAM}-${VERSION}.tar.xz"

SOURCE[1]="$SRCDIR/flathub.flatpakrepo"
SRCURL[1]="https://dl.flathub.org/repo/flathub.flatpakrepo"

##
## --- with a little luck, you won't have to edit below this point --- ##
##

# Automatically determine the architecture we're building on:
if [ -z "$ARCH" ]; then
  case "$(uname -m)" in
    i?86) ARCH=i586 ;;
    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
    # Unless $ARCH is already set, use uname -m for all other archs:
    *) ARCH=$(uname -m) ;;
  esac
  export ARCH
fi
# Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
case "$ARCH" in
  i?86)      SLKCFLAGS="-O2 -march=${ARCH} -mtune=i686"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  x86_64)    SLKCFLAGS="-O2 -fPIC"
             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
             ;;
  armv7hl)   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  *)         SLKCFLAGS=${SLKCFLAGS:-"-O2"}
             SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""}
             ;;
esac

case "$ARCH" in
    arm*)    TARGET=$ARCH-slackware-linux-gnueabi ;;
    *)       TARGET=$ARCH-slackware-linux ;;
esac

# Exit the script on errors:
set -e
trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
# Catch unitialized variables:
set -u
P1=${1:-1}

# Save old umask and set to 0022:
_UMASK_=$(umask)
umask 0022

# Create working directories:
mkdir -p $OUTPUT          # place for the package to be saved
mkdir -p $TMP/tmp-$PRGNAM # location to build the source
mkdir -p $PKG             # place for the package to be built
rm -rf $PKG/*             # always erase old package's contents
rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build
rm -rf $OUTPUT/{checkout,configure,make,install,error,makepkg,patch}-$PRGNAM.log
                          # remove old log files

# Source file availability:
for (( i = 0; i < ${#SOURCE[*]}; i++ )) ; do
  if ! [ -f ${SOURCE[$i]} ]; then
    echo "Source '$(basename ${SOURCE[$i]})' not available yet..."
    # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
    [ -w "$SRCDIR" ] || SOURCE[$i]="$OUTPUT/$(basename ${SOURCE[$i]})"
    if [ -f ${SOURCE[$i]} ]; then echo "Ah, found it!"; continue; fi
    if ! [ "x${SRCURL[$i]}" == "x" ]; then
      echo "Will download file to $(dirname $SOURCE[$i])"
      wget --no-check-certificate -nv -T 20 -O "${SOURCE[$i]}" "${SRCURL[$i]}" || true
      if [ $? -ne 0 -o ! -s "${SOURCE[$i]}" ]; then
        echo "Fail to download '$(basename ${SOURCE[$i]})'. Aborting the build."
        mv -f "${SOURCE[$i]}" "${SOURCE[$i]}".FAIL
        exit 1
      fi
    else
      echo "File '$(basename ${SOURCE[$i]})' not available. Aborting the build."
      exit 1
    fi
  fi
done

if [ "$P1" == "--download" ]; then
  echo "Download complete."
  exit 0
fi

# --- PACKAGE BUILDING ---

echo "++"
echo "|| $PRGNAM-$VERSION"
echo "++"

cd $TMP/tmp-$PRGNAM
echo "Extracting the source archive(s) for $PRGNAM..."
tar -xvf ${SOURCE[0]}
cd ${PRGNAM}-${VERSION}
chown -R root:root .
chmod -R u+w,go+r-w,a+rX-st .

echo Building ...
export LDFLAGS="$SLKLDFLAGS"
export CXXFLAGS="$SLKCFLAGS"
export CFLAGS="$SLKCFLAGS"
mkdir meson-build
cd meson-build
  meson setup \
    --prefix=/usr \
    --mandir=/usr/man \
    --libdir=/usr/lib${LIBDIRSUFFIX} \
    --buildtype=release \
    -Ddbus_config_dir=/usr/share/dbus-1/system.d \
    -Ddocdir=/usr/doc/$PRGNAM-$VERSION \
    -Ddocbook_docs=disabled \
    -Dgtkdoc=disabled \
    -Dprivileged_group=wheel \
    -Dprofile_dir=/etc/profile.d \
    -Dsystem_bubblewrap=/usr/bin/bwrap \
    -Dsystem_dbus_proxy=/usr/bin/xdg-dbus-proxy \
    -Dsystem_helper_user=flatpak \
    -Dtests=false \
    .. \
    2>&1 | tee $OUTPUT/configure-${PRGNAM}.log
  meson compile \
    2>&1 | tee $OUTPUT/make-${PRGNAM}.log
  meson install --destdir $PKG \
    2>&1 | tee $OUTPUT/install-${PRGNAM}.log
cd - 1>/dev/null

# Don't ship .la files:
rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la

# Flatpak would create this otherwise, and by creating it in the package,
# removepkg can track the content changes:
mkdir -p $PKG/var/lib/flatpak

# Add flathub definition.
# The doinst.sh will actually install it as a flatpak remote repository:
install -D -m 0644 -t $PKG/etc/flatpak/remotes.d $SRCDIR/flathub.flatpakrepo

# We want flatpak enabled out of the box:
chmod 0755 $PKG/etc/profile.d/flatpak.sh

# Preserve customized profile script:
mv -i $PKG/etc/profile.d/flatpak.sh{,.new}

# Add this to the doinst.sh:
mkdir -p $PKG/install
cat <<EOINS >> $PKG/install/doinst.sh
# Handle the incoming configuration files:
config() {
  for infile in \$1; do
    NEW="\$infile"
    OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
    # If there's no config file by that name, mv it over:
    if [ ! -r \$OLD ]; then
      mv \$NEW \$OLD
    elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
      # toss the redundant copy
      rm \$NEW
    fi
    # Otherwise, we leave the .new copy for the admin to consider...
  done
}

preserve_perms() {
  NEW="\$1"
  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
  if [ -e \$OLD ]; then
    cp -a \$OLD \${NEW}.incoming
    cat \$NEW > \${NEW}.incoming
    mv \${NEW}.incoming \$NEW
  fi
  config \$NEW
}

preserve_perms etc/profile.d/flatpak.sh.new

# Only way to create and use the correct uid and gid on the target system,
# is to use chroot:
chroot . <<EOR 2>/dev/null
# Add the '${FLAT_GID}' group if it doesn't exist already:
/usr/sbin/groupadd -g ${FLAT_GID} flatpak 2> /dev/null

# Add the '${FLAT_UID}' user if it doesn't exist already:
/usr/sbin/useradd -c "Flatpak system helper" -d /var/lib/flatpak -M \\
  -s "/bin/false" -g ${FLAT_GID} -u ${FLAT_UID} flatpak 2> /dev/null
EOR

# Make the flathub repository available to root:
chroot . \
  /usr/bin/flatpak remote-add --if-not-exists \
  flathub /etc/flatpak/remotes.d/flathub.flatpakrepo
# Inform the user about adding flatpak to their homedirectory:
echo "NOTE:"
echo ">> you can add the FlatHub repository for your own user if you do not want to use the 'root' account, by executing the following command:"
echo ">> flatpak --user remote-add --if-not-exists flathub /etc/flatpak/remotes.d/flathub.flatpakrepo"
echo ">> In general, add '--user' to any flatpak command to make it apply to your own personal environment."
echo ""
EOINS

# Add documentation:
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
find $PKG/usr/doc -type f -exec chmod 644 {} \;

# Compress the man page(s):
if [ -d $PKG/usr/man ]; then
  find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
  for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
fi

# Strip binaries (if any):
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true

# Add a package description:
mkdir -p $PKG/install
cat $SRCDIR/slack-desc > $PKG/install/slack-desc
cat $SRCDIR/slack-required | sed -e "s/appstream/$APPSTREAM/" \
  > $PKG/install/slack-required

# Build the package:
cd $PKG
makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
cd $OUTPUT
md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz}.md5
cd -
cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt
cat $PKG/install/slack-required > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.dep

# Restore the original umask:
umask ${_UMASK_}