Welcome to Eric Hameleers (Alien BOB)'s Wiki pages.
This is an old revision of the document!
Please feel free to leave comments, suggestions.. you name it.
You can also install from a usb pendrive. This is particularly useful if you have a high speed usb 2 port and a fast pendrive. After booting with the pendrive inserted, check that it is recognized with the dmesg command.
The device file will most likely not be in the /dev directory. To create the device file, first find out what the major and minor numbers are by looking at the partitions present:
If you have sata, you might get something like this:
8 0 244198584 sda 8 1 7166848 sda1 ... 8 80 3923456 sdf 8 81 3923440 sdf1
Create the device file with mknod:
mknod /dev/sdf1 b 8 81
Then create a directory to mount on (NOT in the /mnt directory) and mount the pendrive:
mkdir /install mount /dev/sdf1 /install
Partition your harddrive, and run setup. When asked what source, choose to install from a mounted directory….
(You can place this in the article if you think it relevant)
Thank you for your article, but, can you please make a quick attempt to include a tutuorial 'for the rest of us' (ie.- simple enough for the win savvy but linux beginner) that explains method two; booting slackware from one location. The method given above by Jim shed some light on the matter, but I want to be able to do so ion a win environment if possible, otherwise I am going to need to interpret how to do it from a linux environment in a win environment…. enough, I'm not giong o try to sound smart.
Jeromy Boyd jeromyboyd ]at[ gmail ]dot[ com