Welcome to Eric Hameleers (Alien BOB)'s Wiki pages.
If you have anything that annoys you in Slackware, feel free to add that to this page. I will try to answer, and perhaps provide a fix for obvious bugs. — Eric
Thanks for providing extremely useful pages to all Slackware users!
One minor annoyance:
Trouble with rc.inet1 <int>_restart / stop In a system with 2 network cards (let's say one wired, one wireless) and only one card is plugged/active, when shutting down the system, it tries to deactivate the interface which is already down and doesn't have an IP address. No big deal, but wastes a second, prints an error message, and tries to send for an inactive interface More importantly - trying to get a new IP address doesn't work - running rc.inet1 ath0_restart doesn't properly release the IP address so that it's impossible to get a new address on the interface. Same problem happens with rc.inet1 ath0_down&&sleep 5&&rc.inet1 ath0_start
Thanks much! (-Y1)
Hi Yalla! Your problem might be related to tone from Ismael, and fixed with the addition ofifconfig ath0 0.0.0.0
I'll see that I update my scripts sometime soon. Sorry that my replya took so long… never suspected anyone would actually use these discussion pages!
———————————– - Related comment (suggestion):
I've been thinking that maybe Slack's rc.inet1 should also unset the IP address when it brings it down.
ifconfig ethN 0.0.0.0 ifconfig ethN down
IMHO it should do it in both cases, when there's a DHCP assigned address and when it is statically assigned.
I've seen that my RaLink 2500 wireless card gets confused when it is brought(sp?) down but the IP isn't removed (If I run ifconfig -a, then the IP is still being shown!). It get's its IP from DHCP, and the DHCP gets sucesfully killed, but out of sudden the card comes up again, adding a fix like the one above to rc.inet1 seems to solve this.
Maybe you could add that to your enhaced rc.inet1, Eric. And hopefully it will get into Slack 11 :)
— Ismael C.
(ifconfig ethN 0.0.0.0: ) I had already proposed to add this to rc.inet1 but Pat voted it down Still, I can just add it back to my own version of the rc.inet1, and maybe Pat will be convinced of it's use when more people bring this to his attention <hint>