Welcome to Eric Hameleers (Alien BOB)'s Wiki pages.
This is how I build my 2.6 kernels.
I run the commands from an X terminal, and at some point start the X based kernel configurator. I run my desktop as “myself” but I build my kernels as root. In order to let root use my X display, I do the following in my X terminal: get root rights; merge my own (alien's) Xauthority file with the one from the root user, and set the DISPLAY variable. After doing that, I can run X applications from the “su” terminal.
echo $DISPLAY # you'll be needing this value 3 lines below sudo -i # or "su -" on older Slackwares xauth merge ~alien/.Xauthority # use your own username here instead of "alien" export DISPLAY=:0.0 # use the value of DISPLAY you've seen 3 lines before
Alternatively, you can run the following two commands which will give you the same end result:
sudo -s # a side effect of '-s' is that it allows root to run X programs . /etc/profile # sourcing the global profile ensures # that root has the ''sbin'' directories in the $PATH
Now that the build environment is set up, let us continue with obtaining the sources.
Download a new kernel, unpack it into
/usr/src and create the “linux” link so that the commands are a little more generic. I will take a kernel version of “220.127.116.11” as an example. If yours is a different version, you'll know where to change the version strings in the rest of the story below. If you want to know how to verify the integrity of the source code archive using the kernel GPG key, read the last chapter below.
wget http://www.us.kernel.org/pub/linux/kernel/v2.6/linux-18.104.22.168.tar.bz2 tar -C /usr/src -jxvf linux-22.214.171.124.tar.bz2 cd /usr/src rm linux # remove the existing symlink ln -s linux-126.96.36.199 linux # create a symlink pointing to your new linux source
Changing the ”
linux” symbolic link is safe to do. No applications will break if you let it point to another kernel than the one Slackware installed for you. You will probably notice more linux-* directories in
/usr/src. It is common to let the ”
linux” link point to the kernel you are currently working with. It is however no requirement to have this symbolic link. Modern software that needs to know the location of the source code of an installed kernel will look at where the symbolic link
/lib/modules/<kernelversion>/build points to instead.
/usr/srctree or somewhere entirely else.
The cause is an old post by Linus Torvalds (from July 2000) where he advises people to build from within their home directory. I believe this advice is irrelevant for Slackware and the way it has it's kernel headers and glibc package setup. So, my advice is to ignore this old post by Linus and install your kernel sources into
/usr/srcif you want. The kernel building location is purely a matter of personal preference.
Now, get a Slackware kernel config file for a headstart during your own configuring. Pat's config files are pretty generic. By the time you read this, there might be a config for a newer 2.6 release available:
wget http://slackware.mirrors.tds.net/pub/slackware/slackware-13.37/source/k/config-generic-smp-188.8.131.52-smp cp config-generic-smp-184.108.40.206-smp /usr/src/linux/.config
Alternatively, you can grab the configuration for the kernel which is currently running:
zcat /proc/config.gz > /usr/src/linux/.config
Run make oldconfig in the kernel source directory so that the defaults are used from the .config file you just installed. Because your kernel sources are probably newer than the .config, there will be new options to choose from. You will only have to answer these (press ENTER for the default answers which are mostly fine, or M to build new drivers as modules).
cd /usr/src/linux make oldconfig
You now have configured a pretty generic kernel (that is the reason why Pat calls them “kernel-generic” probably but you will want to change some of the defaults to suit your needs. Run the X based configurator (if you do not run X but are at a text console, just run ”
make menuconfig” to get the curses-based dialog program instead)
Walk through the forest of options. What I usually change are things like:
- Build the ext3 (needs the jbd driver as well) and reiser/xfs/jfs fileystem drivers into the kernel instead of compiling them as modules - that way I do not need to create an additional ”initrd“
(see under “Filesystems” in the configurator).
- Enable 64GB of RAM.
(under “Processor type and features” > “High Memory Support (64GB)”). Use this if you have a system with 4GB of RAM or more.
- Enable the “low-latency” kernel if you run a desktop/laptop computer - multimedia apps will run much smoother
(under “Processor type and features” > “Preemption model” > “Preemptible kernel”). If you run a desktop system with a lot of multimedia applications, then this is an useful option for you because it will keep your system more responsive even under high load.
- Set a 1000 Hz timer (under “Processor type and features” > “Timer Frequency” > “1000 Hz”). A higher tick count can be beneficial to multimedia 'desktop' systems.
- Or set a tickless timer (dynamic ticks - under “Processor type and features” > “Tickless System (Dynamic Ticks)”).
- If you are (re-)building a Slackware kernel, you should make sure that installing your new kernel will leave the original kernel modules intact. You do this by changing the local-version part of the kernel's release number to an unique string (under “General setup” > “Local version - append to kernel release”). This kernel option corresponds to CONFIG_LOCALVERSION in your
.configfile. Slackware sets that value to ”-smp” for a SMP kernel to give you an idea.
The resulting kernel release value (as returned by ”
umake -r”) for a kernel version ”
220.127.116.11” with a local-version of ”
-alien” would be ”
- … and more I can't think of right now. You can decide to disable a lot of the modules that the default config will build, to cut down on compilation time, if you don't have the hardware in your computer. You could also look at software suspend and CPU frequency scaling (under “Processor type and features”) if you own a laptop.
And finally save your configuration if you're satisfied.
Now, start the build of kernel and modules, and install them to the proper places.
make bzImage modules # compile the kernel and the modules make modules_install # installs the modules to /lib/modules/<kernelversion> cp arch/x86/boot/bzImage /boot/vmlinuz-custom-18.104.22.168 # copy the new kernel file cp System.map /boot/System.map-custom-22.214.171.124 # copy the System.map (optional) cp .config /boot/config-custom-126.96.36.199 # backup copy of your kernel config cd /boot rm System.map # delete the old link ln -s System.map-custom-188.8.131.52 System.map # create a new link
With 2.6.x kernels, running ”
make” or ”
make all” instead of ”
make bzImage modules” should be sufficient. This will build the default targets, being vmlinux (the uncompressed kernel), bzImage (the compressed kernel which we will be using) and modules (all of the kernel modules). Since we do not need the uncompressed kernel I usually stick to the ”
make bzImage modules” command.
If you want to know more about the available make targets, you can run ”
make help” and examine the output. The default build targets are marked by an asterisk (*).
/etc/lilo.conf and add a new section for your new kernel. Remember, your new kernel may not even boot if you made a mistake somewhere, so you will want to leave the existing sections for your current kernel(s) intact. Your current
/etc/lilo.conf will have a section somewhat like this, near the bottom of the file:
image = /boot/vmlinuz root = /dev/sda1 label = linux read-only # Non-UMSDOS filesystems should be mounted read-only for checking
Add another section just below (adding it below will guarantee that your current - working - kernel will stay the default to boot):
image = /boot/vmlinuz-custom-184.108.40.206 root = /dev/sda1 label = newkernel read-only # Non-UMSDOS filesystems should be mounted read-only for checking
After you have added a section for your new kernel to
/etc/lilo.conf you should save the file, and then run
lilo to activate your changes:
Now is the time for a reboot, and test that new kernel! When the lilo boot screen appears, select the ”
newkernel” option instead of the default ”
If your new kernel boots fine, you can make it the default kernel by adding the following line to the top of
/etc/lilo.conf and re-run “lilo”:
default = newkernel
You are going to build and use a new kernel. You may wonder what you need to do with the Slackware kernel-headers package.
The answer is: do not remove this package!
There are two places where you will find kernel headers; one place is inside the kernel source directory (in our case, the
/usr/src/linux-220.127.116.11 directory) and the other place is
/usr/include/linux. The kernel-headers package usually contains the headers taken from the source of the default Slackware kernel. These particular headers are used when the glibc package is built. The fact that the
kernel-headers package installs these files to
/usr/include/linux makes them independent of the header files you find in the kernel source directory.
- How do the
At some point in time you will want to upgrade (recompile!) parts of your system's software. If that software links against glibc (as most core software does), it's successful compilation relies on the presence of the correct kernel headers in
/usr/include/linux. It does not matter that you are propably running an entirely different kernel than Slackware's default kernel. The
kernel-headerspackage reflects the state of the system at the time
glibcwas built. If you delete the
kernel-headerspackage, your running system will in no way be affected, but you will not be able to (re-)compile most software.
- Do the kernel sources still serve a purpose after you have built your new kernel?
In the previous bullet point I told you that the compilation of system software uses the headers located in
/usr/include/linux. Likewise, the kernel source tree is required any time you want to compile a 3rd-party kernel module (madwifi, linux-uvc, ndiswrapper, … the list is endless). You are not limited to compiling a driver for your running kernel. You can build drivers for any kernel as long as its modules tree (below
/lib/modules) and sources are present.
Let's say you are going to build a module for a kernel whose version you have specified in an environment variable
$KVER. For instance, by running
During the driver's compilation you will need to have this particular kernel's header files available in the location
/lib/modules/$KVER/build/include/linux. The symbolic link
/lib/modules/$KVER/buildis created at the time when you install your new kernel and modules.
If you delete the kernel sources after you build a kernel, you will not be able to build any “out-of-kernel” (other word for 3rd-party) drivers afterwards.
Most certainly you will have installed one or more packages containing kernel modules that are not part of the default kernel. Slackware installs the “svgalib-helper” package for instance, and if you installed any wireless driver, these are basically kernel modules too.
Be aware that by installing and booting into your new kernel, you will no longer have these out-of-kernel modules available. You have to recompile their sources so that the resulting kernel modules match the version of your new kernel.
You can get an overview of all packages that have installed a kernel module for your current kernel by running this command (note that you must run this command while still running your old kernel):
cd /var/log/packages grep -l "lib/modules/$(uname -r)" *
All the listed packages will need a recompile if you want to have their modules available for your new kernel as well.
If you used
upgradepkgthis would remove the old kernel module and you may still need this if you ever want to reboot into your old kernel. This trick works under the assumption that the version of the kernel is part of the VERSION of your package, like here:
svgalib_helper-1.9.25_18.104.22.168-i486-1.txz(I know, lame example since this package no longer exists)
In that case, reboot into runlevel 3, download the latest version of your graphics driver and compile/install the driver. This will enable you to reboot into your graphical logon.
For those who forget, booting into another than the default runlevel is easy: when the LILO screen appears, type the label of your kernel (which was
newkernel in our example above) and after that, type the runlevel number: Newkernel Space3Enter
In case your kernel does not include the driver for your root filesystem, or a driver for your SATA bus, or other stuff that is only built as modules, your kernel will panic if it boots and can not access the necessary disks, partitions and/or files. Typically, this looks like
VFS: Cannot open root device "802" or unknown-block (8,2) Please append a correct "root=" boot option Kernel Panic-not syncing: VFS: unable to mount root fs on unknown block(8,2)
and this means you will have to build an initrd or “Initial Ram Disk” containing the required modules. The location of the initrd is then added in the appropriate section of
/etc/lilo.conf so that the kernel can find it when it boots, and is able to load the drivers it needs to access your disks.
Creating an initrd is quite simple, and I will show two cases here, one in care you have a Reiser filesystem on your root partition, and the second for the case you have an ext3 filesystem. I assume a 22.214.171.124 kernel in these example commands, if your new kernel is different, change the version number as appropriate.
- Change into the /boot directory:
- Run “mkinitrd” to create the
/boot/initrdfile containing a compressed filesystem with the modules you tell it to add on the commandline:
mkinitrd -c -k 126.96.36.199 -m reiserfs
for a Reiser filesystem, or
mkinitrd -c -k 188.8.131.52 -m ext3
in case you installed an ext3 filesystem on your root partition..
- Add the line “initrd = /boot/initrd.gz” to the newkernel's section in the file
/etc/lilo.conf, save your changes and then re-run lilo; I will use the
lilo.confexample section I already used in a previous paragraph:
image = /boot/vmlinuz-custom-184.108.40.206 root = /dev/sda1 initrd = /boot/initrd.gz label = newkernel read-only # Non-UMSDOS filesystems should be mounted read-only for checking
On next boot, your new kernel will not panic.
- If you are already using an initrd image with your current kernel, you can choose between two options:
- Create a second initrd image using the command above but with an explicit name for the resulting initrd file (which should be different from the default in order not to overwrite the old one:
mkinitrd -c -k 220.127.116.11 -m ext3 -o /boot/initrd-custom-18.104.22.168.gz
and then change the
lilo.confsection to look like this:
image = /boot/vmlinuz-custom-22.214.171.124 root = /dev/sda1 initrd = /boot/initrd-custom-126.96.36.199.gz label = newkernel read-only # Non-UMSDOS filesystems should be mounted read-only for checking
- Add the kernel modules for your new kernel to the existing initrd file. That way, you have a single initrd image containing modules for multiple kernels. All you need to do is leave out the option ”
-c” which is the option to wipe the directory
/boot/initrd-treeand start from scratch:
mkinitrd -k 188.8.131.52 -m ext3
mkinitrdcommand. If you run that
mkinitrdcommand, it will produce an initrd image that contains all the kernel modules and support libraries so that your system can boot with the Slackware generic kernel.
Here is an example of how to run the command with it's output shown as well:
/usr/share/mkinitrd/mkinitrd_command_generator.sh /boot/vmlinuz-generic-184.108.40.206 # # mkinitrd_command_generator.sh revision 1.45 # # This script will now make a recommendation about the command to use # in case you require an initrd image to boot a kernel that does not # have support for your storage or root filesystem built in # (such as the Slackware 'generic' kernels'). # A suitable 'mkinitrd' command will be: mkinitrd -c -k 220.127.116.11 -f ext3 -r cryptslack -m mbcache:jbd:ext3 -C /dev/sda8 -u -o /boot/initrd.gz # An entry in 'etc/lilo.conf' for kernel '/boot/vmlinuz-generic-18.104.22.168' would look like this: # Linux bootable partition config begins # initrd created with 'mkinitrd -c -k 22.214.171.124 -f ext3 -r cryptslack -m mbcache:jbd:ext3 -C /dev/sda8 -u -o /boot/initrd.gz' image = /boot/vmlinuz-generic-126.96.36.199 initrd = /boot/initrd.gz root = /dev/mapper/cryptslack label = 188.8.131.52 read-only # Linux bootable partition config ends
You may notice that it detect my LUKS-encrypted root partition.
This script is included in the mkinitrd package of the Slackware releases after 12.2.
Prior to Slackware 11.0, modules for your kernel were loaded either by the hotplug subsystem, or by explicit
modprobe commands in the file
/etc/rc.d/rc.modules. Having the same
rc.modules file for 2.4.x and 2.6.x kernels was not an optimal situation.
In Slackware 12.0 and newer the 2.6 kernel the only kernel that is available. The loading of kernel modules is handled by udev and by explicit
modprobe commands: the modules that are not loaded by udev can still be put in a
rc.modules file. Only, there can now be more than just one file. Slackware will look for the existence of the following (executable) files in this order:
/etc/rc.d/rc.modules.localexists, it will be run
- Else, if
/etc/rc.d/rc.modules-$(uname -r)exists, it will be run
- Else, if
/etc/rc.d/rc.modulesexists, it will be run
The $(uname -r) is the current kernel release. If your kernel version is
184.108.40.206-smp, then Slackware will look for a file
/etc/rc.d/rc.modules-220.127.116.11-smp to run. This way, specific rc files for different kernels can be present, allowing an optimal tuning for your system.
The Slackware 13.37 package
/slackware/a/kernel-modules-smp-18.104.22.168_smp-i686-1.txz will install the file
/etc/rc.d/rc.modules-22.214.171.124-smp. You can use that as an example if you want to build your own kernel and need explicit
modprobe commands for specific kernel modules.
/etc/rc.d/rc.modules-$(uname -r)- you will have to create it yourself. The
rc.modulesusually is a symlink to the
rc.modules-126.96.36.199-smp. A typical result from the absence of a rc.modules file for your specific kernel is that your mouse will not be working. Take that behaviour as a hint to create the
rc.modulesfile! You can take a full copy of any existing
rc.modules-2.6.xxfile. If your system does not have any rc file for a 2.6 kernel you can take the one on the Slackware CD as an example:
Here's an example in case you would have built a new kernel with version
188.8.131.52.alienand you already had installed a Slackware kernel
cp -a /etc/rc.d/rc.modules-184.108.40.206-smp /etc/rc.d/rc.modules-220.127.116.11.alien
/etc/rc.d/rc.modules-18.104.22.168.alien will then be used when your new kernel
The Linux kernel source archives are signed with the OpenPGP “Linux Kernel Archives Verification Key”. This is a means to verify that the source code you downloaded is the original archive and has not been tampered with. The steps for this validation are outlined in this chapter.
- First, import the OpenPGP key into your GnuPG keyring; either by copying the key from the signature page or by importing it from a keyserver. The kernel key ID is
0x517D0F0E. An example goes like this:
gpg --keyserver wwwkeys.pgp.net --recv-keys 0x517D0F0E
The resulting output will be somewhat like this:
gpg: key 517D0F0E: public key "Linux Kernel Archives Verification Key <firstname.lastname@example.org>" imported gpg: Total number processed: 1 gpg: imported: 1
- Next, get the signature file for the kernel archive you've downloaded:
and make sure it is in the same directory as the kernel archive itself.
- The final step is to run gpg on this signature file, and check what it has to report:
gpg --verify linux-22.214.171.124.tar.bz2.sign linux-126.96.36.199.tar.bz2
The output will be like this:
gpg: Signature made Mon Mar 28 01:08:08 2011 CEST using DSA key ID 517D0F0E gpg: Good signature from "Linux Kernel Archives Verification Key <email@example.com>" gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. Primary key fingerprint: C75D C40A 11D7 AF88 9981 ED5B C86B A06A 517D 0F0E
If you would have told gnupg to trust this key, the last part would have looked different. To me, adding a trustlevel to this key makes no real sense, except when you've met one of the kernel developers who had the key with him and could present thrustworthy credentials.
Nevertheless, the outcome is that the source code archive was indeed signed with the key that you just imported. So, that is good news.
- This article has been translated into Spanish by Jorge Courbis: http://coredump.cl/wiki/doku.php?id=compilaci%C3%B3n_de_kernel